You have no items in your shopping cart.
Subtotal: $0.00
Details
Polycrystalline Diamond (PCD) 60° Engraving, 'V' Grooving and Chamfering Router Bits
Diamond is the hardest material on the earth. Polycrystalline Diamond (PCD) tooling is manufactured in a high-temperature and high-pressure laboratory that fuses diamond particles onto a carbide substrate, which allows the diamond to be brazed onto a tool body.
If you’re looking for the ultimate in tooling, you’ve found it! Amana Tool®'s PCD tipped 60 degree engraving, v-grooving and chamfering CNC router bits will groove a wide variety of tough, abrasive materials including composites, particleboard, MDF (both raw or with melamine), veneer and hardwoods. The cutting edge lasts at least 25 times longer than carbide for extremely long life. Depending on the material being cut, PCD tooling has been known to out perform a carbide tool by a ratio of 300:1. However, to be conservative in your buying decision, we suggest you base your expectations on 25:1 ratio over carbide tooling.
Excellent for 'V' Grooving and Chamfering:
- Carbon Fiber
- Composites
- Hard Wood
- Laminated Chipboard and MDF
- Plywood Veneer
- Soft Wood
- Solid Surface
- Synthetic and Homogenous Marble
Excellent for Engraving:
- Aluminum, Brass & Copper
- Aluminum Composites
- Carbon Fiber
- Coroplast®
- Hard Wood
- HDPE
- King Starboard® / Marine Building Material
- Laminated Chipboard and MDF
- Metal Alloys that don't contain Iron
- PCB Board
- Phenolic
- Plastics
- Plywood Veneer
- Soft Wood
- Solid Surface
- Synthetic and Homogenous Marble
- Titanium
Benefits of Diamond Technology
- Harder cutting edge provides higher resistance to wear
- Cut thousands of feet more than carbide without changing tool, saving setup time
- Optimized machine tool efficiency
- Quality of finish is often significantly improved
Warning: Maximum recommended material depth in one pass varies from 0.5mm - 3.0mm depending on the hardness of the material. The harder the material the less the depth.
| (D) Diameter | 1/4 |
|---|---|
| (a°) Angle | 60° |
| (B) Cutting Height | 1/8 |
| (d) Shank | 1/4 |
| Overall Length (L) | 2-3/8 |
| Max RPM | 24,000 |
| Flutes | 2 |
| D1 | 0.005" |
Accessories
Additional
| SKU | DRB-416 |
|---|---|
| Weight, lb | 1.0000 |
| Dimensions | No |
| Country of Manufacture | United States |
| Manufacturer | Amana Tool |